Cropico DO6

Comprehensive digital ohmmeter with temperature compensation

  • Resolution of 100 nano ohm on 2 milli ohm range
  • 2 push button ranges 2 milli ohm… 200 kilo ohm
  • Dry circuit measurement: 18mV limited
Cropico DO6
Share  

Cropico DO6

Click
to Request a Quote

Covering a wide range of measurements from 1 micro ohm to 200 kilo ohm, the DO6 ohmmeter is a comprehensive ohmmeter with many features incorporated as standard.

These benefits include manual and automatic range selection; temperature compensation for copper, referencing the measurement of copper to 20°C; voltage limiting facility for those wishing to measure switch contact resistance to International Standards.

Cropico DO6
Click
to Request a Quote

Technical specification

Measurement 4 Terminal Kelvin/Thomson, eliminating lead resistance errors
Display 4.5 digit 15mm 7 segment LED with polarity and overload indication. 2 digit 16 segment LED for unit display
Ranges 9 ranges manual selection with up/down keys, automatic selection with autorange function
Auto Zero Permits the automatic zero of amplifiers and external circuits
Temperature Compensation Measurement compensated for the following referenced to 20°C:Copper Cu = 3.93%/KBrass Ms63 = 1.50%/KBrass Ms80 = 1.60%/KAmbient sensed with Pt 100 sensor
Relay Output For the pre-selected upper and lower limit values “Too small”,“Correct”, “Too large” Contact load = 30W max 48V 1 Amp
Dry Circuit Measurement In accordance with DIN 41640 part 4 and IEC – 132-1 Open circuit voltage limited to 18mV
Interface RS232 25 pin D-Bush talk listen function
Terminals 4mm safety sockets
Working Temperature 0°C to 50°C rel. humidity 90% max. non-condensing
Storage Temperature -20°C to +60°C
Mains Supply 230 Volts +6% - 10%45Hz to 65Hz approx. 30VA
Safety IEC 1010 Protective Class 1
Dimensions 255mm x 90mm x 263mm (W D H) approx
Mass 5kg approximately


 

 

 

 

 

 

 

 

 

 

 

 

 

CH01 Concentric Handspike

Concentric handspikes View Product..

CO2

Adjustable clamp support, measurement length of up to 1,000mm.   View Product..

CO2A

Clamping device, designed for cross sections of 1mm² to 1,000mm².   View Product..

CO3

Clamping device, designed for scorr sections of 1mm² to 1,000mm².   View Product..

HS01-P

Duplex handspikes with 3 metre lead length compatible with D06. View Product..

HS02-P

Duplex handspikes with 3 and 15 metre lead length compatible with D06 View Product..

LS03-P

Lead set with 3 metre leads and terminated with large Kelvin clips type KC3. View Product..

LS04-P

Lead set with 3 and 15 metre leads and terminated with large Kelvin clips type KC3. View Product..

LS05

Comprising of 4x 1 metre leads with banana plugs 4x crocodile clips, 4xtest prods 2x brass Kelvin clip (KC1) suitable for use with DO4A, DO5000, DO6, DO7. View Product..

LS06-P

Lead set with 1 metre leads terminated in miniature Kelvin clips type KC2. View Product..

RS232 Cable (RSL-03)

RS232 cable compatible with D06. View Product..

       
79