Digital microhmmeter with temperature compensation
- High accuracy 0.03%, 6 ranges, 200milliohms to 30kilohms
- Adjustable current ranges,10uA-100mA
- Fast sampling (0.02Hz) at 10u ohm resolution
The DO5002 micro ohmmeter is a truly remarkable instrument and ideally suited for laboratory testing of samples, for production line testing, and with the addition of the interfaces RS232 / IEEE-488 or PLC, the DO5002 micro ohmmeter may be remotely controlled and integrated into an automated testing system.
The DO5002 micro ohmmeter encompasses all the features required of an ohmmeter in one instrument. Programmable measuring current in 100 steps ensures that the DO5002 is suitable for all your applications. Automatic temperature compensation and Hi / Lo limits permits sorting of components with the minimum of fuss. Statistical analysis of these values allows you to display the max/min /average values as well as peak to peak and standard deviation. The DO5002 will even calculate cable lengths in ohms/metre.
|Cropico DO5000 Series Comparison|
|True 4 terminal measurement eliminates lead resistance errors|
|Measuring range from 3 milli ohm to 30 kilo ohm|
|Measuring range from 200 milli ohm to 30 kilo ohm|
|10 micro ohm resolution|
|100 nano ohm resolution|
|True zero capabilities|
|Automatic temperature compensation with programmable coefficients|
|Open circuit lead warning LED|
|Current range from 10mA to 10A|
|Current range from 10 micro Amp to 10mA|
|Programmable measuring current 10% to 100% in 1% steps|
|High Accuracy 0.03%|
|Fast measuring capability of 50 measurements per second|
|Programmable High Low Limits with red / green lamps on front panel|
|Open Circuit voltage limit mode 20mV / 50mV maximum|
|Measuring current selection +I / -I and Auto average|
|Data logging with statistical analysis|
|Cable length calculations|
|Rechargeable batteries built in|
|Measurement||4 wire eliminates lead resistance|
|Display||LCD Graphics panel with backlight 30,000 count|
|Ranges||Manual / Automatic|
|Auto Zero||Value Average Hold|
|Systems Interface||RS232 fitted as standard, IEEE-488, PLC option|
|Terminals||4mm safety sockets|
|Working Temperature||0°C ... 45 °C|
|Mains Supply||230 V ±10%, 115 V ±10% 47...63Hz|
|Safety||IEC 1010 Class 1|
|Dimensions||339 x 324 x 131mm (W D H)|
|Accessories||Supplied with RS232 interface, mains cord, handbook and certificate of conformity|
|Range||Resolution||Min. Current||Max. Current||Accuracy at full rated current|
|30kOhm||1Ohm||10mA||100mA||±(0.03% Rdg +0.02% FS)|
|3kOhm||100mOhm||100 mA||1mA||±(0.03% Rdg +0.01% FS)|
|300Ohm||10mOhm||1mA||10mA||±(0.03% Rdg +0.01% FS)|
|30Ohm||1mOhm||10mA||100mA||±(0.03% Rdg +0.01% FS)|
Clamping device, designed for cross sections of 1mm² to 1,000mm². View Product..
Clamping device, designed for scorr sections of 1mm² to 1,000mm². View Product..
Lead set with 3 and 15 metre leads and terminated with large Kelvin clips type KC3. View Product..
Comprising of 4x 1 metre leads with banana plugs 4x crocodile clips, 4xtest prods 2x brass Kelvin clip (KC1) suitable for use with DO4A, DO5000, DO6, DO7. View Product..