Digital micro ohmmeter with rechargeable batteries and temperature compensation
- High accuracy 0.03%, 8 ranges, 3milliohms to 30kilohms
- Adjustable current ranges 10uA-10A
- Mains / rechargeable battery operation
The DO5001micro ohmmeter encompasses all the features required of an ohmmeter in one instrument. Automatic temperature compensation and Hi / Lo limits permits sorting of components with the minimum of fuss. All these options are included in the basic unit as well as a data logging function which stores up to 4,000 readings with date and time stamp.
Statistical analysis of these values allows you to display the max/min/average values as well as peak to peak. The DO5001 micro ohmmeter is a truly remarkable instrument and ideally suited for laboratory testing of samples, for production line testing, fast measurement mode which measures at 50 measurements per second.
For applications where portability is required the model 5001 may be powered either from the mains or by the inbuilt rechargeable batteries.
|Cropico DO5000 Series Comparison|
|True 4 terminal measurement eliminates lead resistance errors|
|Measuring range from 3 milli ohm to 30 kilo ohm|
|Measuring range from 200 milli ohm to 30 kilo ohm|
|10 micro ohm resolution|
|100 nano ohm resolution|
|True zero capabilities|
|Automatic temperature compensation with programmable coefficients|
|Open circuit lead warning LED|
|Current range from 10mA to 10A|
|Current range from 10 micro Amp to 10mA|
|Programmable measuring current 10% to 100% in 1% steps|
|High Accuracy 0.03%|
|Fast measuring capability of 50 measurements per second|
|Programmable High Low Limits with red / green lamps on front panel|
|Open Circuit voltage limit mode 20mV / 50mV maximum|
|Measuring current selection +I / -I and Auto average|
|Data logging with statistical analysis|
|Cable length calculations|
|Rechargeable batteries built in|
|Measurement||4 wire eliminates lead resistance|
|Display||LCD Graphics panel with backlight 30,000 count|
|Ranges||Manual / Automatic|
|Auto Zero||Value Average Hold|
|Systems Interface||RS232 fitted as standard, IEEE-488, PLC option|
|Terminals||4mm safety sockets|
|Working Temperature||0°C ... 45°C|
|Mains Supply||230 V ±10%, 115 V ±10% 47...63Hz|
|Safety||IEC 1010 Class 1|
|Dimensions||339 x 324 x 131mm (W D H)|
|Accessories||Supplied with RS232 interface, mains cord, handbook and certificate of conformity|
|Range||Resolution||Min. Current||Max. Current||Accuracy at full rated current|
|30kOhm||1Ohm||10mA||100mA||±(0.03% Rdg +0.02% FS)|
|3kOhm||100mOhm||100mA||1mA||±(0.03% Rdg +0.01% FS)|
|300Ohm||10mOhm||1mA||10mA||±(0.03% Rdg +0.01% FS)|
|30Ohm||1mOhm||10mA||100mA||±(0.03% Rdg +0.01% FS)|
Clamping device, designed for cross sections of 1mm² to 1,000mm². View Product..
Clamping device, designed for scorr sections of 1mm² to 1,000mm². View Product..
The calibration Standard DO5000-CS is designed to enable the full calibration of the DO5000 digital microhmmeter. The resistance ranges are adjusted to a nominal accuracy and the actual value is measured and recorded on the calibration certificat View Product..
Lead set with 3 and 15 metre leads and terminated with large Kelvin clips type KC3. View Product..
Comprising of 4x 1 metre leads with banana plugs 4x crocodile clips, 4xtest prods 2x brass Kelvin clip (KC1) suitable for use with DO4A, DO5000, DO6, DO7. View Product..