Cropico DO5002

The DO5002 micro ohmmeter is a truly remarkable instrument and ideally suited for laboratory testing of samples, for production line testing, and with the addition of the interfaces RS232 / IEEE-488 or PLC, the DO5002 micro ohmmeter may be remotely controlled and integrated into an automated testing system.

The DO5002 micro ohmmeter encompasses all the features required of an ohmmeter in one instrument. Programmable measuring current in 100 steps ensures that the DO5002 is suitable for all your applications. Automatic temperature compensation and Hi / Lo limits permits sorting of components with the minimum of fuss. Statistical analysis of these values allows you to display the max/min /average values as well as peak to peak and standard deviation. The DO5002 will even calculate cable lengths in ohms/metre.

Cropico DO5000 Series Comparison
Features	DO5000	DO5001	DO4002
True 4 terminal measurement eliminates lead resistance errors
Measuring range from 3 milli ohm to 30 kilo ohm
Measuring range from 200 milli ohm to 30 kilo ohm
10 micro ohm resolution
100 nano ohm resolution
True zero capabilities
Digital Calibration
Automatic temperature compensation with programmable coefficients
Open circuit lead warning LED
Current range from 10mA to 10A
Current range from 10 micro Amp to 10mA
Programmable measuring current 10% to 100% in 1% steps
High Accuracy 0.03%
Fast measuring capability of 50 measurements per second
Programmable High Low Limits with red / green lamps on front panel
Open Circuit voltage limit mode 20mV / 50mV maximum
Measuring current selection +I / -I and Auto average
Data logging with statistical analysis
Cable length calculations
Rechargeable batteries built in

Cropico DO5002

Technical specification

Measurement	4 wire eliminates lead resistance
Display	LCD Graphics panel with backlight 30,000 count
Ranges	Manual / Automatic
Auto Zero	Value Average Hold
Systems Interface	RS232 fitted as standard, IEEE-488, PLC option
Terminals	4mm safety sockets
Working Temperature	0°C ... 45 °C
Storage Temperature	-10°C...+60°C
Mains Supply	230 V ±10%, 115 V ±10% 47...63Hz
Safety	IEC 1010 Class 1
Dimensions	339 x 324 x 131mm (W D H)
Weight	8.5kg
Accessories	Supplied with RS232 interface, mains cord, handbook and certificate of conformity

Resistance ranges

Range	Resolution	Min. Current	Max. Current	Accuracy at full rated current
30kOhm	1Ohm	10mA	100mA	±(0.03% Rdg +0.02% FS)
3kOhm	100mOhm	100 mA	1mA	±(0.03% Rdg +0.01% FS)
300Ohm	10mOhm	1mA	10mA	±(0.03% Rdg +0.01% FS)
30Ohm	1mOhm	10mA	100mA	±(0.03% Rdg +0.01% FS)
3Ohm

CH01 Concentric Handspike

Concentric handspikes View Product

CO2

Adjustable clamp support, measurement length of up to 1,000mm. View Product

CO2A

Clamping device, designed for cross sections of 1mm² to 1,000mm². View Product

CO3

Clamping device, designed for scorr sections of 1mm² to 1,000mm². View Product

Cropico DO5000CS

The calibration Standard DO5000-CS is designed to enable the full calibration of the DO5000 digital microhmmeter. The resistance ranges are adjusted to a nominal accuracy and the actual value is measured and recorded on the calibration certificat View Product

HS01-P

Duplex handspikes with 3 metre lead length compatible with D06. View Product

HS02-P

Duplex handspikes with 3 and 15 metre lead length compatible with D06 View Product

IEEE-DO5

Interface IEEE-488 View Product

IEEE-L01

IEEE-488 cable 1 metre View Product

LS03-P

Lead set with 3 metre leads and terminated with large Kelvin clips type KC3. View Product

LS04-P

Lead set with 3 and 15 metre leads and terminated with large Kelvin clips type KC3. View Product

LS05

Comprising of 4x 1 metre leads with banana plugs 4x crocodile clips, 4xtest prods 2x brass Kelvin clip (KC1) suitable for use with DO4A, DO5000, DO6, DO7. View Product