I am using a supernova XE 3760
I have placed short codes and costs against repairs to appliances, for replacement of plugs, sockets or leads. When printing charge lists, no repairs are shown on the report.
Tests and repairs are selected on the charge list with costs etc.
Is this because I have not set up the client information correctly?
Kind Regards
Paul
The Seaward forum will be no longer available from October 2019.
It will be replaced by our new and comprehensive knowledge base on our new website at https://www.seaward.com/gb/support/.
As a result, we are not accepting any new users for the forum.
It will be replaced by our new and comprehensive knowledge base on our new website at https://www.seaward.com/gb/support/.
As a result, we are not accepting any new users for the forum.
Reporting on repairs undertaken
2 posts
• Page 1 of 1
Reporting on repairs undertaken
by downiep » Tue Mar 15, 2011 9:58 am
- downiep
- Posts: 2
- Joined: Tue Mar 15, 2011 9:41 am
Re: Reporting on repairs undertaken
by noel » Tue Mar 15, 2011 11:53 am
Have you made sure your assigning the right line on the test machine to the configured line in the software?
ie line 3 repairs on machine and in software?
ie line 3 repairs on machine and in software?
- noel
- Posts: 1
- Joined: Tue Mar 15, 2011 11:50 am
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group