Good Afternoon All
I was doing some testing this morning and tested the 1st IEC lead since i got my Europa back from being Serviced last month
Using the default 230v Lead (3m) sequence
The lead passed the earth test,
Passed the insulation test
then failed on the Polarity test reporting an open circuit.
I plugged in the short test iec lead that came with the Europa and had the same problem
I grabbed another IEC from a box of spares and another, same issue
I aborted the test and ran the custom test for a multi-way extension cable, again same result.
I connected the 1st lead to a PC monitor the monitor powers up and passes a class 1 it Equipment test.
ive put the IEC leads aside and will check the polarity with an IEC > 13A socket adapter and a socket tester.
But I wanted to check before i contact Service on Monday if this is an issue with the tester or if im doing something dumb