Hi All,
The Apollo 600 manual mentions Power Socket Test on page 26 in section 15, (just before the RCD test). Can someone indicate how this is performed. I have tried to locate this test in the Apollo menu but could not find it. I think this is a useful test since it shows the condition of the power source when the Apollo is connected to mains.
Charles
The Seaward forum will be no longer available from October 2019.
It will be replaced by our new and comprehensive knowledge base on our new website at https://www.seaward.com/gb/support/.
As a result, we are not accepting any new users for the forum.
It will be replaced by our new and comprehensive knowledge base on our new website at https://www.seaward.com/gb/support/.
As a result, we are not accepting any new users for the forum.
Apollo 600 Test
4 posts
• Page 1 of 1
Apollo 600 Test
by pat4sb » Sun Apr 20, 2014 5:42 pm
- pat4sb
- Posts: 6
- Joined: Thu Apr 10, 2014 1:36 pm
Re: Apollo 600 Test
by Stephen Armstrong » Thu May 01, 2014 8:53 am
Thank you for your enquiry.
Regarding the Power Socket Test, the Apollo 500 and 600 both check the input voltage ranges according to the specifications on page 26 of the manual, as soon as a power lead is applied to the instrument. If there is an issue the instrument will show an error, however, it does not display these values.
We have passed your suggestion, regarding displaying these values, over to our Product Managers for consideration in future enhancements of the Apollo.
Kind regards
Technical Support
Regarding the Power Socket Test, the Apollo 500 and 600 both check the input voltage ranges according to the specifications on page 26 of the manual, as soon as a power lead is applied to the instrument. If there is an issue the instrument will show an error, however, it does not display these values.
We have passed your suggestion, regarding displaying these values, over to our Product Managers for consideration in future enhancements of the Apollo.
Kind regards
Technical Support
- Stephen Armstrong
- Technical Sales Engineer
- Posts: 49
- Joined: Fri Jul 05, 2013 8:35 am
Re: Apollo 600 Test
by southseas » Sat Nov 15, 2014 6:50 pm
Any progress on this? It would be really useful to have a record of:
(a) Outlet polarity
(b) Earth Fault Loop Impedance
(c) P- N Voltage
(a) Outlet polarity
(b) Earth Fault Loop Impedance
(c) P- N Voltage
-
southseas - Posts: 146
- Joined: Fri Jul 08, 2011 10:34 pm
Re: Apollo 600 Test
by Amy Lyons » Fri Dec 12, 2014 2:42 pm
Hi southseas
Not at the moment. Have you registered your Apollo with us via our website? If so you will be kept up to date with new firmware as soon as it is released.
Not at the moment. Have you registered your Apollo with us via our website? If so you will be kept up to date with new firmware as soon as it is released.
Thanks and kind regards
Amy Lyons
Applications Engineer
Test & Measurement Division
Seaward Electronic
Amy Lyons
Applications Engineer
Test & Measurement Division
Seaward Electronic
-
Amy Lyons - Applications Engineer
- Posts: 171
- Joined: Mon Apr 23, 2012 2:40 pm
- Location: Peterlee, UK
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group