The Seaward forum will be no longer available from October 2019.

It will be replaced by our new and comprehensive knowledge base on our new website at

As a result, we are not accepting any new users for the forum.

Shorter Test n Tag label

PATGuard 3 Forum

Shorter Test n Tag label

Postby Agro » Wed Mar 05, 2014 5:46 pm

I have a K3100. I am continualy cutting off with scissors about 25mm of yellow tape and throwing it away. This is where the company logo is supposed to be, but I don't use the company logo as I find that with the extra 25mm it is too large to fit in a discrete place.
Is it possible for me to make the label shorter?
Posts: 7
Joined: Mon Sep 16, 2013 9:32 am

Re: Shorter Test n Tag label

Postby Graeme » Fri Mar 28, 2014 12:43 pm

I have the same problem. Some frugal peolple have advised, at the end of the roll, turn it around and re feed, thus using the other half of the label.
Short of this, there is no answer I can see.
Posts: 16
Joined: Mon Oct 15, 2012 12:03 pm

Re: Shorter Test n Tag label

Postby Amy Lyons » Fri Jun 13, 2014 2:48 pm

Hi Agro & Graeme

This area of the label is reserved for you to add a company logo. Unfortunately the printer does not distinguish if there is a logo there or not and prints the label in this place anyway.
With our new printer ranges we have introduced smaller label types and we will continue to look for more economic labelling solutions.
Thanks and kind regards

Amy Lyons
Applications Engineer
Test & Measurement Division
Seaward Electronic
User avatar
Amy Lyons
Applications Engineer
Posts: 171
Joined: Mon Apr 23, 2012 2:40 pm
Location: Peterlee, UK

Return to Portable Appliance Testing

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 3 guests