Is it possible to PA test computers and other IT equipment with the Prime Test 100? I can't see a way to do it without a 500v insulation test.
Anyone using this model on IT equipment?
PATesting IT equipment with Prime Test 100
3 posts
• Page 1 of 1
PATesting IT equipment with Prime Test 100
by cooie » Fri Jan 17, 2014 4:15 pm
- cooie
- Posts: 1
- Joined: Fri Jan 17, 2014 3:17 pm
Re: PATesting IT equipment with Prime Test 100
by Grizzly » Fri Jan 17, 2014 4:45 pm
IT kit shouldn't have any problem with a 500V IR test.
It's the reduced current earth bond test that's the important one.
The 250V IR test was introduced to enable proper testing of surge protected leads, etc.
It's the reduced current earth bond test that's the important one.
The 250V IR test was introduced to enable proper testing of surge protected leads, etc.
C&G 2377 -01 & -02
-
Grizzly - Posts: 116
- Joined: Tue Feb 08, 2011 3:27 pm
Re: PATesting IT equipment with Prime Test 100
by Christopher Coates » Mon Jan 27, 2014 4:18 pm
Dear Cooie,
The 500 V DC test is suitable for IT equipment that is CE marked. CE marked IT equipment should comply with the requirements of BS EN60950, which states that the equipment can withstand a dielectric strength test of 1500V r.m.s.
Christopher Coates
Technical Sales Engineer
Seaward
The 500 V DC test is suitable for IT equipment that is CE marked. CE marked IT equipment should comply with the requirements of BS EN60950, which states that the equipment can withstand a dielectric strength test of 1500V r.m.s.
Christopher Coates
Technical Sales Engineer
Seaward
- Christopher Coates
- Technical Sales Engineer
- Posts: 3
- Joined: Fri Jul 05, 2013 8:35 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group