LordAzrael76 wrote:... does anyone know which wire connects to each terminal in the plug (pat tester end, labelled 1, 2 & 3)?
Glad you've got to the bottom of it!
It doesn't actually matter which wires in the 3-core flex connects to which pins of the 3-pin XLR connector. The Supernova uses the 4-wire method to ignore the resistance of the test lead, and so all 3 cores are connected to the same place on the croc-clip end of the test lead.
For info, my Supernova test lead is wired thus:
Pin 1 Blue
Pin 2 Brown
Pin 3 Green/yellow
but as I said, it doesn't actually matter.
More info on the 4-wire method here: http://www.allaboutcircuits.com/vol_1/chpt_8/9.html