can anyone explain or demonstre how to use supernova elitte

can anyone explain or demonstre how to use supernova elitte

Postby jeffmac » Wed Nov 12, 2014 9:21 pm

Can anyone show how to do practical RCD tests with this tester.
Any other practical tests would also be helpful.Not been able to see this test on YouTube.
jeffmac
 
Posts: 1
Joined: Wed Nov 12, 2014 10:36 am

Re: can anyone explain or demonstre how to use supernova eli

Postby Amy Lyons » Fri Dec 12, 2014 2:04 pm

Hi jeffmac

We do not have a video on how to do this but it is quite simple. You just need to plug in the portable RCD into the EUT socket on the top of the tester and then plug the red IEC lead into the RCD and the IEC socket. You can then perform the test. Please take note of page 92 of the manual.

I hope this helps.
Thanks and kind regards

Amy Lyons
Applications Engineer
Test & Measurement Division
Seaward Electronic
User avatar
Amy Lyons
Applications Engineer
 
Posts: 171
Joined: Mon Apr 23, 2012 2:40 pm
Location: Peterlee, UK

Re: can anyone explain or demonstre how to use supernova eli

Postby Amy Lyons » Fri Dec 12, 2014 2:05 pm

PS. Sorry it has taken so long to reply but can you please post any PAT related enquiries or comments in the PAT forum.
Thanks and kind regards

Amy Lyons
Applications Engineer
Test & Measurement Division
Seaward Electronic
User avatar
Amy Lyons
Applications Engineer
 
Posts: 171
Joined: Mon Apr 23, 2012 2:40 pm
Location: Peterlee, UK


Return to Electrical Test Tools


Who is online

Users browsing this forum: No registered users and 1 guest

 
 
cron