Page 1 of 1

HV multiplexer needed

PostPosted: Thu May 19, 2011 4:52 pm
by stevethomas
I'm hoping to use a HAL104 to hipot test a wiring harness comprising up to 24 wires. Anyone know of a suitable multiplexer? I have a pc with digital I/O cards to control it from.

Re: HV multiplexer needed

PostPosted: Fri May 20, 2011 1:11 pm
by Richard Williams
stevethomas wrote:I'm hoping to use a HAL104 to hipot test a wiring harness comprising up to 24 wires. Anyone know of a suitable multiplexer? I have a pc with digital I/O cards to control it from.


Could you give me a call when convenient. We need test voltage, measurement criteria etc. We currently don't have a multiplexer but depending on the voltage, our ClareHorizon II unit might be suitable.

This does a 500 point test in less than a second.

Please see the link for more info

http://www.seaward.co.uk/products/indus ... horizon-ii

Re: HV multiplexer needed

PostPosted: Thu Jul 28, 2011 5:09 pm
by stevethomas
Thanks Richard.
I looked at the Horizon II, but it didn't have the test voltage we require (2kV rms). I have solved the problem with Pickering modules.