Page 1 of 1

110v leads and plant.

PostPosted: Thu Jun 01, 2017 12:31 pm
by Bigaki
Hi,

Having recently bought a seaward primetest 250plus I seem to be having problems at testing the following.

1 - 110v leads
Earth and isolation is fine but when it comes to polarity I keep on getting the open/fail message. I know this is wrong as I checked both plug ends and they are wired correctly.

2 - 110v power tools
On the insulation test I'm receiving the message lo load even though the power button is on.

I also use a seaward supernova elite model and I don't have the same problems.

Can anyone help!!!
Thanks.