The Seaward forum will be no longer available from October 2019.

It will be replaced by our new and comprehensive knowledge base on our new website at

As a result, we are not accepting any new users for the forum.

Seaward PrimeTest 350 Auto Options for IT Equipment

PATGuard 3 Forum

Seaward PrimeTest 350 Auto Options for IT Equipment

Postby StarshipUK » Mon Feb 13, 2017 5:56 pm

I have a Seaward PrimeTest 350 and noticed these two options in the auto test menu:
H) IT Equip CLI PE Current
Which does these tests:
Earth Continuity 0.10
Insulation 1.0
PE Conductor Current 3.50

I) IT Equip CLII Touch Current
Insulation 2.0
Touch Current 0.25

Is this correct as I did not think you were suppose to do Leakage Tests for IT Equipment?

Instead I have been using these options:
A) Portable/Handheld/IT CLI
Earth Continuity 0.20
Insulation 1.0

B) Portable/Handheld/IT CLII
Insulation 2.0

I am a bit confused by options H and I on the Auto test menu and would appreciate any advice regarding these.
Posts: 1
Joined: Mon Feb 13, 2017 5:24 pm

Return to Portable Appliance Testing

Who is online

Users browsing this forum: No registered users and 5 guests