Don't the test leads of the new Apollo 600 need to conform to GS38?
They do when the crocodile clips are fitted, but remove them and you have over 10mm of exposed tip, but no tip covers are supplied.
The Seaward forum will be no longer available from October 2019.
It will be replaced by our new and comprehensive knowledge base on our new website at https://www.seaward.com/gb/support/.
As a result, we are not accepting any new users for the forum.
It will be replaced by our new and comprehensive knowledge base on our new website at https://www.seaward.com/gb/support/.
As a result, we are not accepting any new users for the forum.
Apollo 600 test leads
2 posts
• Page 1 of 1
Apollo 600 test leads
by dcengineering » Thu Aug 22, 2013 5:58 pm
- dcengineering
- Posts: 5
- Joined: Mon Aug 12, 2013 8:42 am
Re: Apollo 600 test leads
by Amy Lyons » Fri Aug 30, 2013 1:45 pm
Hi dcengineering
GS38 is a HSE guidance note rather than a British Standard however you are correct that you will require tip covers to comply with this.
I have arranged for these to be shipped to you.
GS38 is a HSE guidance note rather than a British Standard however you are correct that you will require tip covers to comply with this.
I have arranged for these to be shipped to you.
Thanks and kind regards
Amy Lyons
Applications Engineer
Test & Measurement Division
Seaward Electronic
Amy Lyons
Applications Engineer
Test & Measurement Division
Seaward Electronic
-
Amy Lyons - Applications Engineer
- Posts: 171
- Joined: Mon Apr 23, 2012 2:40 pm
- Location: Peterlee, UK
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group