Page 1 of 1


PostPosted: Wed Nov 07, 2012 4:42 am
by Tassat01
Hi everyone,

I am wondering if anyone can help with some information on pairing a Datalogic qs6500bt scanner to the Seaward 300 tester.
The bluetooth password on the scanner is 6digits, but when trying to pair it on the seaward tester it only accepts 4 digit passkey.

Does anyone know what to do to change the passkey on the scanner from 6 digits to 4 so I can pair it.

Hope someone has some info.


Pete from Australia