Backdating tests manually entered into Patguard Elite 1.0

PATGuard 3 Forum

Backdating tests manually entered into Patguard Elite 1.0

Postby jonathan » Wed Aug 01, 2012 1:49 pm

Hello,

I have a number of paper test result records that I would like to enter into our Patguard Elite 1.0 software, however when I add a test result it automatically adds it with today's date and there is no way to alter this as far as I can see; the tests were performed as far back as May, the testing is still not complete (I have a day job too) but I wanted to make a start on entering the data. This is not practical and I don't want to have test dates that are inaccurate on the system as they won't tie in with the labels on equipment.

Is there any way to adjust these dates during or after manual data entry or are they just hard coded by the system?

Thank you for any assistance with this.
User avatar
jonathan
 
Posts: 37
Joined: Mon Apr 30, 2012 2:06 pm

Re: Backdating tests manually entered into Patguard Elite 1.

Postby safe + sound » Fri Aug 03, 2012 11:11 am

Hi Jonathon
after you have manualy added the test, it appears in the Test Results window with the cursor in the Test Number field. Click on the newly added date and you can edit it. You must do this before OKing the window.
safe + sound
 
Posts: 50
Joined: Wed Feb 09, 2011 6:43 pm

Re: Backdating tests manually entered into Patguard Elite 1.

Postby jonathan » Sun Aug 05, 2012 8:42 pm

Ah right, thank you. I will give this a go the next time I am able.
User avatar
jonathan
 
Posts: 37
Joined: Mon Apr 30, 2012 2:06 pm


Return to Portable Appliance Testing


Who is online

Users browsing this forum: No registered users and 1 guest

 
 
cron