Patguard Elite Reports

PATGuard 3 Forum

Patguard Elite Reports

Postby thunderchild » Wed Feb 09, 2011 2:57 pm

I am trying to amend existing reports so they will output the information we require but I need quite a few columns but cannot fit them in, is there a way to turn the paper to landscape?
thunderchild
 
Posts: 2
Joined: Wed Feb 09, 2011 2:54 pm

Re: Patguard Elite Reports

Postby Jim Wallace » Wed Feb 16, 2011 8:06 pm

Hi thunderschild

I dont know the answer so I'll ask one of my colleagues in our software department to advise.
User avatar
Jim Wallace
Associate Director, Seaward Product and Technology
 
Posts: 124
Joined: Wed Feb 16, 2011 7:35 pm

Re: Patguard Elite Reports

Postby Scotty Dog » Wed Feb 16, 2011 8:54 pm

Have you tried right click the report you want, make a copy you will have to give the copy a name,click edit then you can turn the page to landscape and alter the columns dont know if this will work with existing data.VERY VERY IMPORTANT MAKE A COPY OF REPORT DO NOT WORK ON AN ORIGINAL UNTILL YOU HAVE EVERY THING WORKED OUT
Scotty Dog
 
Posts: 6
Joined: Tue Feb 08, 2011 10:19 pm

Re: Patguard Elite Reports

Postby thunderchild » Thu Feb 17, 2011 8:53 am

Yes I have copies and original and edited it but I cannot see where you turn the page to landscape. I keep getting an error telling me the page is not wide enough hence why I want to turn it landscape.
thunderchild
 
Posts: 2
Joined: Wed Feb 09, 2011 2:54 pm

Re: Patguard Elite Reports

Postby Scotty Dog » Thu Feb 17, 2011 11:00 pm

Go into edit-project-page setup-printers selection-select which option you want-click select, this brings up the printer options then select landscape,then you have to play about with the columns
Scotty Dog
 
Posts: 6
Joined: Tue Feb 08, 2011 10:19 pm

Re: Patguard Elite Reports

Postby Julie Jones » Wed Mar 09, 2011 12:55 pm

Please go to where the program resides, Normally C drive, Program files, seaward, then go into reports, find the report you want to landscape and apply the changes I have marked in red for you and marked with swap this next to them.
This will change your reports to landscape.

Created=27/06/2000, 19:38:43
CreatedByApp=Llmfc32.exe [1.0.001]
CreatedByDLL=cm32L7.dll [7.006 (20000613 0931)]
CreatedByUser=Peter on Peter
LastModified=25/10/2007, 16:01:10
LastModifiedByApp=PATGUARD2.EXE [2, 0, 0, 0]
LastModifiedByDLL=CMLL12.DLL [12,13,0,0 (07-06-20 16:54)]
LastModifiedByUser=Martin on MARTINCHAPLIN
CreatedByCallFrom=MFC80D.DLL
[Layout]
P1.Template=
P2.Template=
xOffset=0
yOffset=0
xSize=209800 swap this
ySize=296600 with this one
P1.xOffset=0
P1.yOffset=0
P1.xSize=209800 swap this
P1.ySize=296600 with this one
P2.xOffset=0
P2.yOffset=0
P2.xSize=209800 swap this
P2.ySize=296600 with this one
P1.nPaperFormat=9
P1.xPaperSize=210100 swap this
P1.yPaperSize=296900 with this one
P1.ForcePaperFormat=FALSE
P2.nPaperFormat=9
P2.xPaperSize=210100 swap this
P2.yPaperSize=296900 with this one
P2.ForcePaperFormat=FALSE
xGrid=700
yGrid=700
GridShow=FALSE
GridSnap=FALSE
PhysicalPage=TRUE
P1.PhysicalPage=TRUE
Julie Jones
 


Return to Portable Appliance Testing


Who is online

Users browsing this forum: Bing [Bot] and 1 guest