Page 1 of 1

Elite Reporting function

PostPosted: Wed Nov 30, 2011 5:44 pm
by mikep100
Patguard Elite v 2.0.3 report command has worked without fail in the three years since buying the software. Today for the first time there's a problem - on selecting the tab labelled "Reports" in the bottom panel of the screen no icons for report type appear - the panel is blank. The adjacent tabs for "Personnel" and "Test Instruments" work OK - icons appear for all relevant test personnel and for our one test instrument respectively.

If I have to reload the program from CD will the database be read successfully after the re-install or do I need to back it up and re load that too?