How to update the firmware on the Apollo 400+?

Please Note: Updated May 2023

Prior to updating the firmware on your tester please check your current version and follow the guidance below.

Your Apollo will have either a Version number of 4.X.XX or below, or 5.X,XX. It is important to note the following 

Apollo Units running V4.X,XX or below can only be updated to the latest V4 Firmware (currently V4.1.7), please do not attempt to update to V5 firmware with this model.

Apollo units running V5.X.XX firmware cannot be rolled back to V.4.X.XX firmware versions, please do not attempt to install earlier versions.

If you are looking to copy your settings, including Test Sequences, Users, etc, to a new tester, then a firmware update is not required, please follow details for cloning a tester within our Technical Support pages.

Checking Version Number

To check the firmware version on your Apollo Series, select Information (F5), from the Home Screen.

In the bottom right hand portion of the screen the Apollo will display a version number, make a note of this, and follow instructions relevant to your number.

Version 5.X.X

If your version is 5.X.X then please DO NOT attempt to update the firmware to any previous version 4.X.X

Version 4.X.X or below

If your current version is 4.X.X of lower then instructions below can be followed to update your version.

Firmware Download V4.X.X or below 

To check / download the latest version of firmware (V4.1.7) visit the following: www.seaward.com/apollo-400-plus-firmware

Firmware Download V5.X.X 

To receive the latest version of firmware (V5.0.53) please raise a support ticket to request a download link for the firmware.

 

Update Instructions

Make sure you backup (download) any data on your instrument beforehand. You may want to also clone (download) your settings data (Apollo 500+ and 600+) so that you can upload these afterwards.

Make sure the Apollo+ Series is switched off. Press and hold the function key , then press the ON button to power on the Apollo+ Series, keeping the key depressed until the updater screen is displayed.

Press F2 to Update via PC (Apollo+ Series). Connect the USB lead between the PC and the Apollo+ Series and press F1, as instructed.

Copy the downloaded firmware file (with extension .tar.bz2) to the new Apollo+ Series drive on your PC (for example, Apollo (E:))

Press F1 to begin the firmware update - when the update is complete the display will show “Update complete, restart the system or press F1 to return to the main menu.”

Press and hold the OFF button  until the Apollo+ Series powers off. The firmware update, via the PC, is now complete and the Apollo+ Series is ready to use. 

Stay in the know
Sign up to our mailing list today to stay up to date with the latest industry news and information from Seaward.

I'd like to talk to a sales advisor

Our team of sales advisors are on hand to help you with any queries you have about our products.